HP E45c G5 44.5" DQHD Curved

Firmware History

1. 1.50.11.0

   2024-06-13

   - Corrects an issue where the Split Screen hot-key button was not being disabled while HDMI was active and VDD mode was activated. -Corrects an issue seen with some HP USB docks where the E45c monitor screen may flash on/off once when the monitor is about to enter into low power sleep mode. -Corrects an issue where the E45c monitor was incorrectly changing sync settings with the PC while in split screen “PbP (Picture-by-Picture)” and “Device Bridge” modes, which would negatively affect the Microsoft Windows “Multiple Displays” settings. -Corrects an issue where the brightness setting in the E45c monitor OSD was not being updated correctly after changing to a new color preset. -Corrects an issue where the E45c monitor OSD brightness value was not being updated correctly with ALS (Ambient Light Sensor) enabled. -Corrects an issue where the E45c monitor may not be detected correctly (no video issue) after detaching/attaching to an HP USB dock. -Corrects an issue where the E45c monitor would randomly wake up from sleep mode when two PCs are connected.

   Download from HP (opens in new tab)
2. 1.50.8.0

   2023-07-04

   1. Corrects a ‘no video’ issue with the DisplayPort input when selecting an option from the “USB-C Configuration” menu. 2. Correct incorrect vertical and horizontal frequency information that appeared when using an AMD RX6900XT graphics card with the HDMI input while FreeSync is on. 3. Corrects an intermittent loss of audio issue when a specific input connection order is used (HDMI and DP connected first, then USB-C1 and USB-C2 connected). 4. Corrects a ‘no TTS (Text To Speech)’ audio issue after “Accessibility” mode is turned on and the “Swap USB Host” hot-key is used. 5. Corrects the input switching order for the “Next Active Input” hot key while in VDD (Virtual Dual Display) mode. 6. Corrects an issue where the “Input Signal Not Found” message was showing the wrong input in the message. 1. Improves the video switching function of the KVM hotkey (CTRL + CTRL). 2. For VDD (Virtual Dual Display), DisplayPort is added to the auto-switching input operation. 3. Improves the user experience for “Split Screen” modes by recalling the last mode used when toggling “Split Screen” on/off via the button menu hot-key. 1. Improves the video switching function of the KVM hotkey (CTRL + CTRL). 2. For VDD (Virtual Dual Display), DisplayPort is added to the auto-switching input operation. 3. Improves the user experience for “Split Screen” modes by recalling the last mode used when toggling “Split Screen” on/off via the button menu hot-key.